Amplifier Stereo car amplifier overheating? if car stereo deck is set to sub off is it ok for the amplifier to still be on?
I have the amplifier on and the car stereo deck setting off for the sub out setting, The amp is warm still is it ok for the amp to be on if it is not sending power to the subs?!
if the amp is not being used until you get this problem figured out i would disconnect the blue turn on wire.
so does it over heat and shut down or just get hot, amps are generally in efficient and the unused power is wasted as heat.
if it shuts off it could be wired to too low of an ohm load or speaker wires shorted or something along those lines.
brainstorm as to why this is happening and re ask the question with the amp and sub models and other info.
amps at idle can get warm but it is best to unplug the turn on wire.
The PCA1 mini stereo power amplifier from Pyle provides up to 15W of power on each channel at 4 ohms. Connect your inputs using the RCA jacks, and output an amplified audio signal over standard speaker push jacks...
The PCA3 mini stereo power amplifier from Pyle provides up to 75W of power on each channel at 4 Ohms. Connect your inputs using the RCA jacks, and output an amplified audio signal over standard speaker push jacks...
The PCA2 mini stereo power amplifier from Pyle provides up to 40W of power on each channel at 4 Ohms. Connect your inputs using the RCA jacks, and output an amplified audio signal over standard speaker push jacks...
AudioSource has produced a distinguished line of stereo power amplifiers. AudioSource's amps provide high sound pressure levels, as well as subtle details with accuracy and transparency. You won't find better sounding amps at anywhere near the price...
Pyle PCA4 Home Amplifier is perfect for powering any stereo system. Complete with 2 x 120 watts of power -- this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs...
Pyle PTAU34 Home Amplifier is perfect for powering any stereo system. Complete with USB and AUX inputs, and 2 x 75 watts of power -- this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs...
Pyle Pro's PTA2 combines the usefulness of a small, take-anywhere amplifier with a full featured mixer. Three stereo line-level inputs and a 1/4" microphone input are provided for source connection and mixing...
It has flash rainbow light in the front panel and very beautiful at night.
Light & Firm Aluminum alloy case for distribution of heat easily
RCA Input , can be used as Ipod,MP3/MP4 headphone amplifier
Mini size easy to installation by DIY, especially good fit for car, motor bike and other audio DIY device.
This massive, powerful amp pushes 8000-watts of bone-shattering sound in a rack-mountable package! Each channel supports up to 1000 watts maximum for a sound that’s truly colossal and can be assigned to the left, right, or mono channel of the input...
This compact 2-channel amplifier features a sturdy cast-aluminum chassis that supplies 1000-watts maximum power. Built-in high-pass and low-pass filters adjust the amplifier output.
6V6GT Single Ended - 6SN7 SRPP Stereo Amplifier Trial