Series Amplifier
need some feedback on the mackie m series amplifier(4000)?
is it powerful a good amp worth it does it really have the power it says
Wow - That is a great amp! It will last for years and probably be very reliable. Mackie has been making great amps for many years. They are not some "no name " company.
Here is the power output:
Stereo Mode
8 ohms per channel: 800W
4 ohms per channel: 1300W
2 ohms per channel: 2000W
Bridge Mono mode
8 ohms: 2600W
4 ohms: 4000W
If you have two 8 ohm speakers, the amp will put out 800 watts per speaker.
You can trust their power ratings.
DB Link PK4Z 17 Feet 4 AWG Translucent Red LinkFlex Power Cable - 17 Feet Jammin‘ RCA Cable - 3 Feet 4 AWG Black LinkFlex Ground Cable - 17 Feet 18 AWG Blue Remote Wire - 25 Feet 16 AWG Speaker Wire - AGU Heat Resistant Fuse Holder - 60 Amp AGU Gold Plated Fuse - 6 Feet Split Loom - Wire Ties & Accessories
|
|
2000W; 17-Ft, 4-Gauge, Translucent Blue Linkflex Power Cable; 17-Ft Competition Series Rca Cable; 3-Ft, 2-Gauge, Translucent Silver Linkflex Ground Cable; 17-Ft, 18-Gauge, Blue Remote Wire; 25-Ft, 16-Gauge, Speaker Wire; Anl Heat-Resistant Fuse Holder; 150 Amp Anl Gold-Plated Fuse; 6-Ft Split Loom
|
|
Power up your system with Alpines V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for you, and provides flexibility and value in an aggressive design...
|
|
Hifonics HFi Series A/B Stereo Amplifier 4 x 100 @ 4 OHMS, 4 x 200 @ 2 OHMS, 2 x 400 @ 4 OHMS
|
|
Remote Bass Control, Control the output level of the amplifier remotely, Compatible with any kicker amplifier with a remote jack (IX/ZX/DX/ZXM)
|
|
ZCK8 Z-SERIES 8AWG AMP KIT W/ 2CH INTERCONNECTS, ROHS COMPLIANT
|
|
5-channel amplifer 100 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 (at 1.5-4 ohms) 75 watts RMS x 4 (at 1.5-3 ohms) + 500 watts RMS x 1 (at 1.5-4 ohms) 150 watts RMS x 2 bridged (at 3-6 ohms) + 500 watts RMS x 1 at (1...
|
|
Hifonics Hfi Series D-Class Mono Amplifier 1 x 475 @ 4 OHMS, 1 x 750 @ 2 OHMS, 1 x 1000 @ 1 OHM
|
|
1600 watt arctic amplifier.
|
|
RCA 100-foot, 16-Guage Speaker Wire connects speakers to you're A/V receiver or amplifier. Includes a spool for easy and convenient installation.
|
|
GPS System consists of Antenna, LNA, SAW filter, GPS RF Front-End and GPS Module which includes Fox Crystal Oscillators, Fox RTC crystal having frequency 32.768 KHz, and an LDO (low drop out) regulator.
Antenna: - It transfers the transmitter energy to signals in space with the required distribution and efficiency. It also measures the direction accurately.
Low Noise Amplifier (LNA):- It is a special type of electronic amplifier which amplify the weak signal received by the Antenna and to reduce the noise into the received signal also. It is often placed very close to antenna to minimize the losses occurs in the coaxial cable feed line because it is very loss at microwave frequencies.
Surface Acoustic Wave Filter (SAW):- SAW filters received the amplified signal from Low Noise Amplifier and fed to the GPS RF Front-End. It is electromechanical devices in which electrical signals are converted to a mechanical wave in a device constructed of a piezoelectric crystal or ceramic.
GPS RF Front-End:- RF front end is a generic term which is found in a receiver that sits between the antenna and the intermediate frequency (IF) stage.
GPS Module: - It includes Fox Crystal Oscillators, RTC crystal having frequency 32.768 KHz and an LDO (Low drop out) regulator.
Few series of FOX are used as a TCXO in GPS application such as FOX923GP, FOX914 and FOX312BE series because of clipped sine output, 0.5 PPM stability, and 1.8 to 3.3 operating voltages.
FOX series are used as a RTC crystal in GPS application such as FX255, FX145 and FX135 series because of long term stability and frequency of 32.768 KHz.
The Fox products which are used in GPS application are RoHS-Compliant product.
US $250.00
