Watt Wireless How to set up a wireless access point?
I want to set up a wireless access point, using:
- 1 linksys radio
- 1 bandpass channel filter
- 1 2watt power
- 1 antenna splitter(1->3)
- 3 external antenna(27db each)
i've tried above configuration but resulted in many errors (can't connect, unstable ping reply, etc)... my questions are:
1. what is the correct configuration?
2. what is the minimum distance and maximum distance if i use 2 watt power divided by 3 (27db) antenna? and how about the noise? because I can't connect to the AP if I use the power ampli, connect successfully if i don't use the power ampli...but the coverage area is very small
thanx for your answers....
Well,If you have no problem in configuring your wireless access point and your clients can recognize it`s SSID then you have a signal strength problem.
There are many factors affecting your wireless signals.Some of the most important ones are:Over usage of cell phones specially GSM ones.Fluorescent lights(Really affective),channel conflict(There might be a signal of another access point working near you,the default channel is 11 try to use another one).
You can change the working channel in your access point management console.
I suggest that you bring a laptop near your access point and test if the signal works fine,then do the above instructions except for changing the channel.
The JBL 150PWBK is a powerful 300 Watt RMS 10-inch powered subwoofer that does not require a wire to run between the source and the subwoofer. This version is in cherry.
Does the floor of your entertainment room, with your new widescreen TV and home-theater system, seem like a web of wires? Boston Acoustics Horizon Series Wireless Subwoofers deliver sound and performance with no speaker wire required...
The JBL ES250PWBK is a powerful 400 Watt RMS 12-inch powered subwoofer that does not require a wire to run between the source and the subwoofer. This version is in black.
The JBL 250PWCH is a powerful 400 Watt RMS 12-inch powered subwoofer that does not require a wire to run between the source and the subwoofer. This version is in cherry.
Amazon.com Product Description Enjoy your videos the right way by rotating your iPod from portrait to landscape position on the Philips DC912 docking entertainment system. A digital wireless subwoofer imparts deep, powerful bass to all of your music no matter the source, and the compact, sleek design is a great fit for any room...
The W2 audio system from iSymphony combines a sleek and compact wall-mountable wireless main unit with wireless speakers for flexibility unrivaled by conventional audio systems. Right out of the box, W2 delivers crystal-clear CD-quality music wherever you want it, without the drawbacks of previous-generation wireless systems--no pops, squeaks, or audio drop-outs; all you hear is your music...
Ipod/Mp3 Input Jack With A 3.5mm Cable Unit Powered By Internal Rechargeable Battery Pack One Vhf Wireless Mic With Fcc Certificate 2 Mic, 1 Guitar And 1 Audio 1/4'' Input One 6.35mm Male To 3.5mm Stereo Female Adaptor Echo, Bass And Treble Controls Rf, Rechargeable, Low Batt And Power Led Indicator Handheld Wireless Mic With 3 Position Power Switch & Led Operation Range: 100ft 10" Woofer And Mid And Tweeter 400w Rms, 800w Peak Power Unit Battery Life: Approx...
The JBL WEM-1 is a Wireless Expansion Module that allows the user to make any loudspeaker wireless. The kit contains a transmitter that wirelessly transmits a signal up to 70 feet. The WEM-1 includes a receiver/amplifier that receives the wireless signal and drives any pair of loudspeakers with its internal 50 watt amplifier...
BADA 2W High Power Audio/Video Transmitter/Receiver Kit
This hot new item sends Stereo Sound and Video from your TV, VCR , Hi-Fi System or Satellite system through floors, or ceiling to a TV or speakers in another room--up to 300 feet away! It uses 2...
US $309.90
